답변[re] 리눅스에서 안됩니다
안녕하세요~ 김대준 고객님 ipTIME 고객지원실 입니다.
리눅스의 경우 Windows시스템과는 달리 장치 드라이버 설치가 Setup.exe형식으로 되어 있지 않고 현재 파일들이 소스 파일로 제공 됩니다.
홈페이지에서 다운로드 받은 커널소스, 커널 헤더 파일을 컴파일 하셔서 configure 라는 파일을 실행하시면( ./configure) *.o 형식의 파일이 생성됩니다.
생성된 파일을 리눅스에서 로드하셔야 리눅스 환경에서 사용 가능합니다.
물론 우분투 계열 리눅스를 사용하시면 좀더 편리하게 사용하실 수 있으며, 리눅스마다 방법이 다소 다르기 때문에 상세한 로딩방법까지는 안내해 드리기 어려운 점 양해 부탁드립니다.
유선상으로 안내해 드린 Linux관련 소스 링크 입니다. 아래의 링크에서 'RT2501PCI/mPCI/CB(RT61:RT2561/RT2561S/RT2661)'자료를 참조하시면 됩니다. (ipTIME G300P, G054P 칲셋)
http://www.ralinktech.com/ralink/Home/Support/Linux.html
---------------------------------------------------------------------------------
*****************************************************************
RT73 a/b/g STA driver interface with WPA Supplicant
Ralink Tech Corp.
*****************************************************************
Q0. Contents:
-----------------------
defconfig
driver_ralink.c
driver_ralink.h
drivers.c
Makefile
README
wpa_supplicant_example.conf
Q1. How to compile
-----------------------
The driver interface was developed on wpa_supplicant v.0.4.7. You can install the WPA Supplicant Free Edition development from website.
http://hostap.epitest.fi/wpa_supplicant/
After download the package then go to wpa_supplicant directory Follow the steps..
1.) Copy file "driver_ralink.c" and "driver_ralink.h" we provide to wpa_supplicant directory.
2.) Set driver_ralink configuration as y in the "defconfig" or update to the "defconfig" we provide::
# Driver interface for Ralink rt61 driver CONFIG_DRIVER_RALINK=y
3.) Add wpa_driver_ralink_ops() into wpa_supplicant_drivers() in file "drivers.c"
or update to the file "drivers.c" we provide::
#ifdef CONFIG_DRIVER_RALINK extern struct wpa_driver_ops wpa_driver_ralink_ops; /* driver_ralink.c */
#endif /* CONFIG_DRIVER_RALINK */
:
:
struct wpa_driver_ops *wpa_supplicant_drivers[] = {
#ifdef CONFIG_DRIVER_RALINK
&wpa_driver_ralink_ops,
#endif /* CONFIG_DRIVER_RALINK */ }
4.) Edit the "Makefile" or update to the "Makefile" we provide::
ifdef CONFIG_DRIVER_RALINK CFLAGS += -DCONFIG_DRIVER_RALINK OBJS_d += driver_ralink.o endif
5.) type $cp defconfig .config
6.) Compile the source code using 'make' command.
Q2. How to start wpa_supplicant
--------------------------------
1.) First start rt61 driver.
2.) Edit/Create a configuration file of wpa_supplicant.
-a) Set your work directory of wpa_supplicant for sockets
ctrl_interface = YOUR_WORK_PATH
-b) Set YOUR_OPENSC_PATH if need be. (e.g. generate certificates)
opensc_engine_path =/YOUR_OPENSC_PATH/engine_opensc.so
pkcs11_engine_path =/YOUR_OPENSC_PATH/engine_pkcs11.so
pkcs11_module_path =/YOUR_OPENSC_PATH/opensc-pkcs11.so
-c) Set network configuration. (e.g. WPA/EAP-TTLS)
*** refer to wpa_supplicant.conf in details or related documents ***
3.) Manually start wpa_supplicant,
type $./wpa_supplicant -c your_config_file -i ra0 -D ralink
turn on debug mode,
type $./wpa_supplicant -c your_config_file -i ra0 -D ralink -d
감사합니다.
>>> 김대준 님이 쓰신 내용 <<<
>
>리눅스에서 된다고 해서 2개 구입을 했습니다. >근데 드라이버가 안됩니다. 되게 해주시단지 아니면은 광고물에서 빼던지 >관련 기관에 통지 하겠습니다.(MIC, 소비자.....)
>
감사합니다.
리눅스의 경우 Windows시스템과는 달리 장치 드라이버 설치가 Setup.exe형식으로 되어 있지 않고 현재 파일들이 소스 파일로 제공 됩니다.
홈페이지에서 다운로드 받은 커널소스, 커널 헤더 파일을 컴파일 하셔서 configure 라는 파일을 실행하시면( ./configure) *.o 형식의 파일이 생성됩니다.
생성된 파일을 리눅스에서 로드하셔야 리눅스 환경에서 사용 가능합니다.
물론 우분투 계열 리눅스를 사용하시면 좀더 편리하게 사용하실 수 있으며, 리눅스마다 방법이 다소 다르기 때문에 상세한 로딩방법까지는 안내해 드리기 어려운 점 양해 부탁드립니다.
유선상으로 안내해 드린 Linux관련 소스 링크 입니다. 아래의 링크에서 'RT2501PCI/mPCI/CB(RT61:RT2561/RT2561S/RT2661)'자료를 참조하시면 됩니다. (ipTIME G300P, G054P 칲셋)
http://www.ralinktech.com/ralink/Home/Support/Linux.html
---------------------------------------------------------------------------------
*****************************************************************
RT73 a/b/g STA driver interface with WPA Supplicant
Ralink Tech Corp.
*****************************************************************
Q0. Contents:
-----------------------
defconfig
driver_ralink.c
driver_ralink.h
drivers.c
Makefile
README
wpa_supplicant_example.conf
Q1. How to compile
-----------------------
The driver interface was developed on wpa_supplicant v.0.4.7. You can install the WPA Supplicant Free Edition development from website.
http://hostap.epitest.fi/wpa_supplicant/
After download the package then go to wpa_supplicant directory Follow the steps..
1.) Copy file "driver_ralink.c" and "driver_ralink.h" we provide to wpa_supplicant directory.
2.) Set driver_ralink configuration as y in the "defconfig" or update to the "defconfig" we provide::
# Driver interface for Ralink rt61 driver CONFIG_DRIVER_RALINK=y
3.) Add wpa_driver_ralink_ops() into wpa_supplicant_drivers() in file "drivers.c"
or update to the file "drivers.c" we provide::
#ifdef CONFIG_DRIVER_RALINK extern struct wpa_driver_ops wpa_driver_ralink_ops; /* driver_ralink.c */
#endif /* CONFIG_DRIVER_RALINK */
:
:
struct wpa_driver_ops *wpa_supplicant_drivers[] = {
#ifdef CONFIG_DRIVER_RALINK
&wpa_driver_ralink_ops,
#endif /* CONFIG_DRIVER_RALINK */ }
4.) Edit the "Makefile" or update to the "Makefile" we provide::
ifdef CONFIG_DRIVER_RALINK CFLAGS += -DCONFIG_DRIVER_RALINK OBJS_d += driver_ralink.o endif
5.) type $cp defconfig .config
6.) Compile the source code using 'make' command.
Q2. How to start wpa_supplicant
--------------------------------
1.) First start rt61 driver.
2.) Edit/Create a configuration file of wpa_supplicant.
-a) Set your work directory of wpa_supplicant for sockets
ctrl_interface = YOUR_WORK_PATH
-b) Set YOUR_OPENSC_PATH if need be. (e.g. generate certificates)
opensc_engine_path =/YOUR_OPENSC_PATH/engine_opensc.so
pkcs11_engine_path =/YOUR_OPENSC_PATH/engine_pkcs11.so
pkcs11_module_path =/YOUR_OPENSC_PATH/opensc-pkcs11.so
-c) Set network configuration. (e.g. WPA/EAP-TTLS)
*** refer to wpa_supplicant.conf in details or related documents ***
3.) Manually start wpa_supplicant,
type $./wpa_supplicant -c your_config_file -i ra0 -D ralink
turn on debug mode,
type $./wpa_supplicant -c your_config_file -i ra0 -D ralink -d
감사합니다.
>>> 김대준 님이 쓰신 내용 <<<
>
>리눅스에서 된다고 해서 2개 구입을 했습니다. >근데 드라이버가 안됩니다. 되게 해주시단지 아니면은 광고물에서 빼던지 >관련 기관에 통지 하겠습니다.(MIC, 소비자.....)
>
감사합니다.







































