답변[re] [정보] Ralink RT2760/RT2790/RT2860/RT2890/RT309X PCI for 윈도우통합버전 20090313
안녕하세요~ 오용섭[오서방] 고객님, ipTIME 기술팀 입니다.
지속적인 관심으로 먼저 확인하여 주시고 올려주신 드라이버 패치 내용 감사합니다.
본 홈페이지 드라이버 관련 페이지도 업데이트하겠습니다.
앞으로도 많은 관심과 성원부탁드립니다.
감사합니다.
>>> 오용섭[오서방] 님이 쓰신 내용 <<<
>
>다운로드
>http://www.ralinktech.com.tw/data/drivers/IS_AP_STA_RT2860_D-1.4.1.0_VA-2.3.1.0_RU-2.2.2.0_VA-2.2.7.0_AU_2.1.2.0_VA-2.1.2.0_031309_1.0.8.0_Free.exe
>
>Hardware Supported:
>Ralink RT2860/RT2890/RT2760/RT2790/RT309X chipsets.
>
>Software Supported:
>Windows 2000, XP 32/64 and Vista 32/64.
>
>Release History:
>IS_AP_STA_RT2860_D-1.4.1.0_VA-2.3.1.0_RU-2.2.2.0_VA-2.2.7.0_AU_2.1.2.0_VA-2.1.2.0_031309_1.0.8.0_FREE
>
>Install Package 1.0.8.0
>1. Use the SERVICE_FILE_NAME name instead of RalinkRegistryWriter.exe
>2. Use the SERVICE64_FILE_NAME name instead of RalinkRegistryWriter64.exe
>3. Silent uninstall for the RalinkRegistryWriter service when overwrite
>4. Do not pack the RaUI_9x and HelpFile_9x in the RT2860 and RT2870 install package
>5. Add RT2870 HW DeviceID_69=USBVID_0DF6&PID_003F
>6. Terminate ApUI.exe and softap help window before copying common file
>
>Driver Vista 2.3.1.0
>1. Forbidden TKIP on 802.11n HT.
>2. Capable to Disable 5GHz Adhoc Mode.
>3. Update RaCoInst.dat for additional 3 countries Tx power setting changed.
>4. Fixed the STA cannot finish the WPS handshaking if it connects the target WPS AP in advance.
>5. Update TX mixer gain for RT309X to improve TX EVM.
>6. WAPI Rekey feature.
>7. Limit Tx rate to 2 Mbps when NDS link up.
>8. RT27xx NIC unexpected NIC removal – FW V.15.
>9. CCXv5 performance & roaming enhancement.
>10. Ralink Tx aggregation feature.
>11. Speed up hidden AP connection when the carrier detect is enabled.
>12. Enhance RT35xx Radio-Off power consumption – FW V.18.
>13. RT3592/RT3562/RT3062 preliminary support.
>14. Support new CE channel 167,169,171,173.
>15. Fall-back to legacy data rate when connect with 11n AP.
>16. OFDM Rx failure for IOT issue.
>
>Driver XP 1.4.1.0
>1. Forbidden TKIP on 802.11n HT
>2. Add Reposit BSSID List merge to current BSSID List
>3. Capable to disable 5GHz Adhoc mode
>4. Update RaCoInst.dat for additional 3 countries Tx power setting changed
>5. Fixed the STA cannot finish the WPS handshaking if it connects the target WPS AP in advance
>6. Update TX mixer gain for RT309X to improve TX EVM
>7. WAPI Rekey feature.
>8. Limit Tx rate to 2 Mbps when NDS link up
>9. RT27xx NIC unexpected NIC removal – FW V.15
>10. Enhance 35xx Radio-Off power consumption – FW.V18
>11. RT3592/RT3562/RT3062 preliminary support.
>12. Support new CE channel 167,169,171,173.
>13. Fall-back to legacy data rate when connect with 11n AP.
>14. OFDM Rx failure for IOT issue.
>
>RaUI Vista 2.2.7.0
>1. User can input more than 32 characters as SSID on SysConfig page.
>2. When adding/editing a profile, memory leak is detected.
>3. The profile key index isn't emptied for non-WEP encryption profile.
>4. The focus isn't set to name/password tab when changing PEAP/TLS to PEAP/MSCHAP2(LEAP).
>5. WPS profiles are missing when turning off radio, plugging out card, plugging in card, then turning on radio.
>6. Simplified Chinese characters display incorrectly on menus.
>7. Changing radio state in RaUI doesn't reflect in Windows utility.
>8. Incorrect warning message appears when exporting the WPS profile.
>9. Add Adhoc 5G disable registry key.
>10. Update HT table.
>11. Add CE channels.
>12. Remove scanning action after connection.
>13. Remove noise level indication.
>
>RaUI XP 2.2.2.0:
>1. Add DetectMoreThanOneProcess function. When using two process (RaUI.exe) and two user, don't switch AP mode.
>2. When authentication mode is shared-wep, don't show 802.1x.
>3. Change _TRANSMIT_SETTING structure. Add two HT mode (11b and 11g).
>4. Set the focus to another item on sitesurvey list when pressing a key.
>5. When radio status is from off to on, reset TIMER_HIDE_DLG_RETRY_CON timer.
>6. Memory leak about adding/editing profile.
>7. Fixed RaUI crash issue.
>8. After radion status is from off to on, delay 1.5 seconds to connect the AP for RT3070.
>9. Add new OID, RT_OID_802_11_WSC_SET_HW_PBC_CUSTOMER_VENDOR_STATE_MACHINE
>10. Delay 600ms after doing disconnection in order to finish link down behavior for WPS(RT2870D_1.3.0.0 driver bugs).
>11. When switching from AP to STA mode, don't scan the APs with 5G band.
>12. Fixed the incorrect simplified Chinese character display.
>13. When selecting correct certificate, can show warning message about incorrect certificate.
>14. Radio status is changed to on, it shouldn't connect the AP with open authentication.
>15. When radio status is off and then open RaUI, can’t get WPS profile.
>16. If the registry value of "Adhoc5GDisable" is 1, then UI will hide 5G channels for adhoc mode.
>17. When exporting WPS profile with 32-character SSID, it shouldn't show 33-character SSID on profile page.
>18. When linking up, set ADDKEY for wep encryption with non-802.1x.
>19. After 10 seconds, ready to retry to connect WAPI-PSK for infrastructure type. And for adhoc type, shouldn't retry to connect.
>20. When switching zeroconfig tool, set "NetworkType" registry/OID (Network Type = Ndis802_11Infrastructure) and HT setting OID (BW==40).
>21. Add CE channel.
>22. When link up, the UI can crash because don't check if G_pProfData is NULL.
>23. When connecting the AP by using bssid, don't set country region oid every time.
>24. When connecting the AP on LEAP authentication, shouldn't remove wep key.
>
>ApUI Vista 2.1.2.0:
>APUI XP 2.1.2.0:
>1. Modify the statistics structure to query OID.
>2. Modify the condition to detect device exist in OnTimer function.
>3. Fixed TxRate combobox is not visible.
>4. Fixed reset counter in Statistic page fail in Vista.
>5. Fixed 2.4 G and 5G, the behavior of BW40 check box disable or enable is different.
>6. Add channel 169, 173 to country region 7, region 15 which contains channel 149, 153, 157, 161, 165, 169, 173
>7. uncheck and diable "ALLOW BW40" if selecting channel 169 or 173.
>8. Add"11nTKIPandWEP=0" to "ProhibitTKIPonHT=1" in APUI.ini to disable TKIP in 11n mode.
>9. Add "ProhibitWEPonHT=1" in APUI.ini to disable WEP in 11n mode. 감사합니다.
지속적인 관심으로 먼저 확인하여 주시고 올려주신 드라이버 패치 내용 감사합니다.
본 홈페이지 드라이버 관련 페이지도 업데이트하겠습니다.
앞으로도 많은 관심과 성원부탁드립니다.
감사합니다.
>>> 오용섭[오서방] 님이 쓰신 내용 <<<
>
>다운로드
>http://www.ralinktech.com.tw/data/drivers/IS_AP_STA_RT2860_D-1.4.1.0_VA-2.3.1.0_RU-2.2.2.0_VA-2.2.7.0_AU_2.1.2.0_VA-2.1.2.0_031309_1.0.8.0_Free.exe
>
>Hardware Supported:
>Ralink RT2860/RT2890/RT2760/RT2790/RT309X chipsets.
>
>Software Supported:
>Windows 2000, XP 32/64 and Vista 32/64.
>
>Release History:
>IS_AP_STA_RT2860_D-1.4.1.0_VA-2.3.1.0_RU-2.2.2.0_VA-2.2.7.0_AU_2.1.2.0_VA-2.1.2.0_031309_1.0.8.0_FREE
>
>Install Package 1.0.8.0
>1. Use the SERVICE_FILE_NAME name instead of RalinkRegistryWriter.exe
>2. Use the SERVICE64_FILE_NAME name instead of RalinkRegistryWriter64.exe
>3. Silent uninstall for the RalinkRegistryWriter service when overwrite
>4. Do not pack the RaUI_9x and HelpFile_9x in the RT2860 and RT2870 install package
>5. Add RT2870 HW DeviceID_69=USBVID_0DF6&PID_003F
>6. Terminate ApUI.exe and softap help window before copying common file
>
>Driver Vista 2.3.1.0
>1. Forbidden TKIP on 802.11n HT.
>2. Capable to Disable 5GHz Adhoc Mode.
>3. Update RaCoInst.dat for additional 3 countries Tx power setting changed.
>4. Fixed the STA cannot finish the WPS handshaking if it connects the target WPS AP in advance.
>5. Update TX mixer gain for RT309X to improve TX EVM.
>6. WAPI Rekey feature.
>7. Limit Tx rate to 2 Mbps when NDS link up.
>8. RT27xx NIC unexpected NIC removal – FW V.15.
>9. CCXv5 performance & roaming enhancement.
>10. Ralink Tx aggregation feature.
>11. Speed up hidden AP connection when the carrier detect is enabled.
>12. Enhance RT35xx Radio-Off power consumption – FW V.18.
>13. RT3592/RT3562/RT3062 preliminary support.
>14. Support new CE channel 167,169,171,173.
>15. Fall-back to legacy data rate when connect with 11n AP.
>16. OFDM Rx failure for IOT issue.
>
>Driver XP 1.4.1.0
>1. Forbidden TKIP on 802.11n HT
>2. Add Reposit BSSID List merge to current BSSID List
>3. Capable to disable 5GHz Adhoc mode
>4. Update RaCoInst.dat for additional 3 countries Tx power setting changed
>5. Fixed the STA cannot finish the WPS handshaking if it connects the target WPS AP in advance
>6. Update TX mixer gain for RT309X to improve TX EVM
>7. WAPI Rekey feature.
>8. Limit Tx rate to 2 Mbps when NDS link up
>9. RT27xx NIC unexpected NIC removal – FW V.15
>10. Enhance 35xx Radio-Off power consumption – FW.V18
>11. RT3592/RT3562/RT3062 preliminary support.
>12. Support new CE channel 167,169,171,173.
>13. Fall-back to legacy data rate when connect with 11n AP.
>14. OFDM Rx failure for IOT issue.
>
>RaUI Vista 2.2.7.0
>1. User can input more than 32 characters as SSID on SysConfig page.
>2. When adding/editing a profile, memory leak is detected.
>3. The profile key index isn't emptied for non-WEP encryption profile.
>4. The focus isn't set to name/password tab when changing PEAP/TLS to PEAP/MSCHAP2(LEAP).
>5. WPS profiles are missing when turning off radio, plugging out card, plugging in card, then turning on radio.
>6. Simplified Chinese characters display incorrectly on menus.
>7. Changing radio state in RaUI doesn't reflect in Windows utility.
>8. Incorrect warning message appears when exporting the WPS profile.
>9. Add Adhoc 5G disable registry key.
>10. Update HT table.
>11. Add CE channels.
>12. Remove scanning action after connection.
>13. Remove noise level indication.
>
>RaUI XP 2.2.2.0:
>1. Add DetectMoreThanOneProcess function. When using two process (RaUI.exe) and two user, don't switch AP mode.
>2. When authentication mode is shared-wep, don't show 802.1x.
>3. Change _TRANSMIT_SETTING structure. Add two HT mode (11b and 11g).
>4. Set the focus to another item on sitesurvey list when pressing a key.
>5. When radio status is from off to on, reset TIMER_HIDE_DLG_RETRY_CON timer.
>6. Memory leak about adding/editing profile.
>7. Fixed RaUI crash issue.
>8. After radion status is from off to on, delay 1.5 seconds to connect the AP for RT3070.
>9. Add new OID, RT_OID_802_11_WSC_SET_HW_PBC_CUSTOMER_VENDOR_STATE_MACHINE
>10. Delay 600ms after doing disconnection in order to finish link down behavior for WPS(RT2870D_1.3.0.0 driver bugs).
>11. When switching from AP to STA mode, don't scan the APs with 5G band.
>12. Fixed the incorrect simplified Chinese character display.
>13. When selecting correct certificate, can show warning message about incorrect certificate.
>14. Radio status is changed to on, it shouldn't connect the AP with open authentication.
>15. When radio status is off and then open RaUI, can’t get WPS profile.
>16. If the registry value of "Adhoc5GDisable" is 1, then UI will hide 5G channels for adhoc mode.
>17. When exporting WPS profile with 32-character SSID, it shouldn't show 33-character SSID on profile page.
>18. When linking up, set ADDKEY for wep encryption with non-802.1x.
>19. After 10 seconds, ready to retry to connect WAPI-PSK for infrastructure type. And for adhoc type, shouldn't retry to connect.
>20. When switching zeroconfig tool, set "NetworkType" registry/OID (Network Type = Ndis802_11Infrastructure) and HT setting OID (BW==40).
>21. Add CE channel.
>22. When link up, the UI can crash because don't check if G_pProfData is NULL.
>23. When connecting the AP by using bssid, don't set country region oid every time.
>24. When connecting the AP on LEAP authentication, shouldn't remove wep key.
>
>ApUI Vista 2.1.2.0:
>APUI XP 2.1.2.0:
>1. Modify the statistics structure to query OID.
>2. Modify the condition to detect device exist in OnTimer function.
>3. Fixed TxRate combobox is not visible.
>4. Fixed reset counter in Statistic page fail in Vista.
>5. Fixed 2.4 G and 5G, the behavior of BW40 check box disable or enable is different.
>6. Add channel 169, 173 to country region 7, region 15 which contains channel 149, 153, 157, 161, 165, 169, 173
>7. uncheck and diable "ALLOW BW40" if selecting channel 169 or 173.
>8. Add"11nTKIPandWEP=0" to "ProhibitTKIPonHT=1" in APUI.ini to disable TKIP in 11n mode.
>9. Add "ProhibitWEPonHT=1" in APUI.ini to disable WEP in 11n mode. 감사합니다.
